The WeatherBee covers your scooter or wheelchair from moisture and dust when being stored or transported
Cover From Moisture And Dust
Diestco WeatherBee Cover
The WeatherBee covers your scooter or wheelchair from moisture and dust when being stored or transported. It′s durable, but it′s also lightweight and easy to handle if your mobility is limited! To use, simply slip over your vehicle. Secure underneath using the locking drawstring and grommets for elastic cords (cords not included). Don′t let the elements ruin your investment! Models also available for Power Wheelchairs and Folding Wheelchairs.
400-denier nylon with a urethane backing provides the highest level of protection from the elements for your scooter or powerchair. Works great on lifts or for just storing your powerchair outside!
The cover will provide protection for your vehicle (scooter/ wheelchair) from the weather and dust. Yet, it is lightweight and easy to get on and off!
Slip the cover over your vehicle and pull the elastic down under your chassis. Pull the chord lock so that it is tight around the bottom. For extra security, when transporting your vehicle on the back of your car or van, tie down the bottom by hooking bungee-type cords (not included) through the bottom belt loops.
This is a Standard cover; you will have grommets with a draw cord and cord lock to tighten. Depending on your vehicle, cover may not fit over wheels.
- Mini Standard 30"H x 16"W x 42"L
- Regular Standard 33"H x 18"W x 55"L
- Large Standard 33"H x 28"W x 55"L
- Super Size Standard 46"H x 33"W x 64"L
- Regular Standard 38"H x 18"W x 44"L
- Large Standard 38"H x 23"W x 44"L
- Super Size Standard 48"H x 31"W x 44"L
Details and Specifications for the WeatherBee Cover
Mini Standard 30"H x 16"W x 42"L
Regular Standard 33"H x 18"W x 55"L
Large Standard 33"H x 28"W x 55"L
Super Size Standard 46"H x 33"W x 64"L
Regular Standard 38"H x 18"W x 44"L
Large Standard 38"H x 23"W x 44"L
Super Size Standard 48"H x 31"W x 44"L
Manual and Videos for the WeatherBee Cover
Warranty for the WeatherBee Cover
NOTE: The cover is not intended for highway use without using some securing device (i.e. rope or bungee cords) over the top of the cover. This will reduce the amount of excess room under the cover and prevent the cover from billowing up at high speeds. If your cover is flapping excessively at high speeds, the life of the cover will be greatly reduced. Damage to your cover following misuse is not covered under any warranty.