The Splash! Aquatic Lift is a semi-portable lifting system designed for swimming facilities seeking to provide user-friendly access to their swimming pools. The Splash!is battery powered and operated by a screw driven actuator. The design and durability of the system ensures consistent operation and minimizes service problems.
The Splash! lift is attached to the pool deck using a company provided square anchor socket, similar to those used for starting blocks or backstroke flag stanchions.
The Splash! is virtually maintenance free. The components are made from corrosion-resistant materials, including powder-coated aluminum (arms), and powder-coated stainless steel (base, mast, and seat frame). The unique seat of the lift was specifically designed to provide the user with the greatest possible safety, comfort and ease of transfer. The hand control is completely waterproof, and allows either the user or the attendant to control its operation with ease. The control box and battery are water resistant and should be protected from long exposure to the water. A small, waterproof cover is included with each lift to cover the control box when the system is in use. If the lift is used outdoors, an optional full cover is available for purchase and is recommended to use to protect the system. Pricing includes a footrest.
We request a Poolside Configuration Worksheet with each order so that the lift can be engineered to match the each customer’s specific pool specifications.
The Splash! lift is available in the following forms:
Splash! – Standard Splash! lift provides 400lb lifting capacity. Mounted to deck with company supplied square anchor socket.
Splash! Spa - Designed for use with spas up to 52” (132 cm) above the deck.
Splash Hi/Lo – The perfect lift for facilities that have an above ground spa and an in-ground pool. The dual position chair allows a single lift to be used in both locations.
Splash! Extended Reach – For use with pools with unusual gutter configurations requiring a longer reach to the water line.
Accessories:
Splash! All Weather Cover Protect your investment with a full, all-weather cover. Custom fitted for the Splash! Semi-Portable Aquatic Lift. The cover is made from rugged blue nylon cordura.
Stability Vest The Stability Vest was designed to facilitate the transfer of individuals with limited or no idependent upper body or trunk stability. The vest attaches the user to the chair, strapping them in for support.
Square Deck Anchor Company provided square deck anchor is included with each lift and is used for mounting all Splash! lifts. The cap covers the opening in the anchor when the lift is not in place.
Detachable Armrests Detachable powder coated stainless steel armrests are available for increased sense of security.
Seat Pad Waterproof seat pad designed to enhance comfort and minimize potential skin damage that could occur during transfer is available as an optional accessory.
Spine Board Attachment The Spine Board Attachment works with any standard spine board (not included). Simply remove the chair assembly by pulling the attachment pin and replace that assembly with the Spine Board Attachment. One person can easily extract an injured swimmer from a pool, keeping the injured person fully supine during the procedure.
Splash! Caddie The Splash! Caddie facilitates handling, transporting and storing a Splash! aquatic lift. Fabricated from rugged steel for strength and powder-coated for appearance, the Splash! Caddie helps to protect both your investment and your staff. The Caddie simplifies both insertion and removal of the connector shaft into the insert in the pool deck and becomes a convenient storage rack for the lift when not in use.
Technical: * Lifting Capacity: 400 lbs. * Lifting: Linak LA34 Mechanical Actuator * Maximum Thrust: 1680 lbs. * Voltage: 24 VDC * Max. Amp: 9 * Max Speed: 0.59 inches/sec * Rotation: ITT SWMK 403.033 24 VDC 13 RPM * Gearing Ratio: 9:1 * Power: Linak Rechargeable Batter Pack BAJ1 * 24 VDC, IP65 Gel Lead Acid
Materials and Finish: * Base: Powder Coated Stainless Steel * Housing: Powder Coating Aluminum * Mast: Powder Coated Stainless Steel
Dimensions: * Base Dimensions: 18" diameter * Total Weight: 140 lbs. * Overall Height: 72" * Overall Length (footprint): (fully extended) 72” w/o footrest, 86” with footrest 35" stored position
Range of Motion: * Lifting: -Variable to suit needs of pool -49 inches total travel for standard Splash! -Seat depth 18-20" below waterline * Rotational: 359 degrees total rotation
Within the first 90 days following delivery of the Product 1. A Return Merchandise Authorization (RMA) will be issued for the return of the defective component. This RMA number should be clearly displayed on the outside of the package containing the returned part. 2. RMT will pay all freight charges for any component that fails within the first 90 days. 3. The defective component will be inspected by our technical staff to determine if the product can be repaired. If the component cannot be repaired it will be replaced with a new component. After the 90 days 1. A Return Merchandise Authorization (RMA) will be issued for the return of the defective component. This RMA number should be clearly displayed on the outside of the package containing the returned part. 2. The customer is responsible for all freight costs after 90 days. 3. The defective component will be inspected by our technical staff to determine if the product can be repaired. If the component cannot be repaired it will be replaced with a remanufactured component.
After the 90 days 1. A Return Merchandise Authorization (RMA) will be issued for the return of the defective component. This RMA number should be clearly displayed on the outside of the package containing the returned part. 2. The customer is responsible for all freight costs after 90 days. 3. The defective component will be inspected by our technical staff to determine if the product can be repaired. If the component cannot be repaired it will be replaced with a remanufactured component.
