Harmar AL420 Universal Double Motor inside Lift for all Scooters or powerchairs
The Harmar AL420 is our premium grade, heavy-duty, fully powered inside lift with its 400 lb. capacity, the AL420 lifts virtually every scooter and chair on the market and the motorized rotational base powers it safely into the vehicle. Universal design allows installation on either side of the vehicle and external applications such as pick-up trucks.
Tall post available is for larger vehicles and offset post is available for tailgate applications.
Model AL420 - Fully-powered rotation for effortless loading - Only 30" of headroom required - Extremely adjustable base and boom - Mounts on either side of vehicle - Weather resistant - Remote hand control - Removable hook with swivel
Lifting Capacity 400 lbs Powered Rotation Yes Adjustable Boom Height 30" - 40" Adjustable Boom Length 23.5" - 33.5" Adjustable Boom Pitch 0 - 30 degrees Adjustable Rotation Limit Yes Manual Crank Backup Yes
Lifting Capacity
400 lbs
Powered Rotation
Yes
Adjustable Boom Height
30" - 40"
Adjustable Boom Length
23.5" - 33.5"
Adjustable Boom Pitch
0 - 30 degrees
Adjustable Rotation Limit
Manual Crank Backup
*Docking Device Included.
HARMAR DOCKING DEVICES & ACCESSORIES
Harmar mobility offers a complete line of docking devices and options for use with
the AL055, AL065, AL200, and AL400 series of Powerchair, wheelchair and
scooter lifts. These devices allow the different styles of scooters and power wheel chairs
on the market today to easily attach to the lift end for easy loading and unloading.
Because the variety of ways that scooter and power chairs are manufactured,
not every docking device will work with every style of scooter or wheelchair.
T-Bar Docking Device- This docking device is for use with most scooters with a seat post.
To use this device, the seat of the scooter must be removed so the hook on the strap can attach unless it is used with a C-Arm which allows the seat to be left (see below).
The loop is adjustable to allow the vehicle to be lifted over its center of gravity.
The generic docking device is the minimum device required to lift most scooters.
it comes standard with all Inside Lifts
----------------------------------------------------------------------------------------------------------------
----------------------------------------------------------------------------------------------------------------------
C-Arm :
This is a device that is used in many cases with the generic docking device to allow the scooter to be lifted without the removal of the seat.
This handy device comes in two different sizes to accommodate the many different types of seats that are on scooters.
The C-arm′s come in regular size (8.5" opening) or in a tall size (10.5" opening)
--------------------------------------------------------------------------------------------------------------------------
Spreader Bar- DD20 This device is used for lifting many different types of power wheelchairs. This unit allows the chair to be lifted by hooking to the frame of the chair.
It has adjustable straps on each side which allows the spreader bar to attach to be used with different styles of docking devices such as the twin docking device or the power chair bridles that are shown below.
This device spans the seat of the chair and picks it up from the sides. Part# DD20,DD21
----------------------------------------------------------------------------------------------------------------------------
Power Chair Bridles- This type of docking device is used when the other types of docking
devices are not applicable. The bridles attach to the frame of the power chair and are used in conjunction with the spreader bar.
On many chairs the bridles will attach using existing bolt holes in the frame.
Although, there are times when holes must be drilled to allow proper attachment of the bridles to the frame of the chair being used. part# DD14
-------------------------------------------------------------------------------------------------------------------------------
Offset Post option- For tailgate or curbside applications, the offset post option is the answer. The 10 inch offset and 190 degree rotation provides additional clearance around tailgates on trucks and suburban′s or for lifting full assembled scooters or chairs into the back of full size or mini vans and station wagons.
This option is available exclusively on the AL200 and AL400 wheelchair and scooter lift models.
Tall Post Option- When additional lifting height is required and the extra headroom is available, the tall post option fits the bill. Minimum clearance of 37 inches is required when using this option. This option is available exclusively on the AL410 and AL420 wheelchair and scooter lift models.
Harmar Inside lift docking device kits and Optional Accessories
(FREE SHIPPING with Lift purchase)
DD14
Power chair bridles
DD16
Free T-bar docking device with lift purchase (must remove seat)
DD17
T-Bar docking device (must remove seat)
DD18
Telescoping docking device for adjustable C-Arm (Included with C-arm)
DD19
Adjustable C-arm (with telescoping docking device)
DD20
Spreader Bar docking device (T-bar style)
DD21
Spreader bar docking device with power chair bridles
PO02
Offset post upgrade for tailgates
PO03
Tall post upgrade (requires 37" of headroom)
AT01
All thread kit for irregular floors
ALA18010R1 : Vehicle Wiring Harness w/ Full Length Ground Wire (included for free with all electric lifts)
ALA48010R3 & ALA28010- Hand Controls for inside lifts (AL600, AL200, AL400, AL065 & AL055)
ALA123 : Class 3 Hitch Adapter Standard. 7.5" Length
ALA125 : Extra Long Class 3 Hitch Adapter Standard. 13.5" Length
ALA126 : Class 2 Hitch Adapter Standard. 7.5" Length
ALA127 : 3" Longer Class 2 Hitch Adapter Standard. 10" Length
ALA1235 : 5" Step Down Class 3 Hitch Adaptor
ALA590 : Wide Anchor Plate 24"
ALA58040 : Standard Anchor Plate for AL500 19"
DD20 Spreader Bar- This device is used for lifting many different types of power wheelchairs. This unit allows the chair to be lifted by hooking to the frame of the chair. It has adjustable straps on each side which allows the spreader bar to attach to be used with different styles of docking devices such as the twin docking device or the power chair bridles that are shown below. This device spans the seat of the chair and picks it up from the sides. Part# DD20,DD21
3 YEARS TRANSFERABLE MANUFACTURER′S WARRANTY
