Harmar Mobility AL690 Side Door Hybrid Lift
The desire for closer access inspired the AL690 Hybrid Platform Lift. This life will deliver a power chair or scooter right next to the driver or passenger′s door. Simple, one button operation and drive-on, drive-off simplicity make the AL690 one of the most user friendly lifts available.
Features:
Delivers chair or scooter closer to the driver or passenger′s door
Compatible with most power chairs and shorter scooters
Remote hand control
No drilling required, connects to second row seat hardware
Lifting Capacity
275 lbs
Headroom Required
32"
Depth Required
58.5"
Platform Dead Space
4.5" Max
Verical Reach
33.5"
Platform Size
21.5" - 28.5" x 38.5"
FAQ:
Q: Is this lift weather resistant? No. This lift is designed to be used only in fully enclosed vehicles.
Q: Can I carry both a power chair and a scooter on this lift? A: Yes, this lift is designed to accommodate either a power chair or a scooter.
Q: Can one lift be moved between two different vehicles? A: While it is possible to move a lift from one vehicle to another, it is not recommended to
do so frequently. If two different vehicles will be used often, we recommend having a lift
installed on each vehicle.
Q: What maintenance must be performed to keep the lift operating properly? A: All Harmar Mobility products are designed and tested to operate flawlessly for years of
trouble-free use with very little maintenance.
Please refer to the Owners′ Manual for specific product maintenance schedules.
Q: Can the lift be plugged into the existing wiring on my vehicle? A: No, all Harmar Mobility lifts must be powered by the supplied electrical harness.
The harness has full-length leads that attach directly to the battery.
Q: The lift is powered by my vehicle’s battery; what if my car looses power? A: Many Harmar lifts have standard backup systems that allow them to be moved manually
by Harmar Mobility Authorized Dealers and qualified mechanics such as roadside assistance
technicians. Harmar Mobility recommends that end users should not attempt to use the
manual override feature.
